Your first bulk edit: a step-by-step walkthrough

Overview

This guide walks you through making your first bulk price edit in BulkOps — applying a 10% price increase to all products in a specific collection.

Step 1 — Open the bulk editor

In BulkOps, click Products in the left sidebar. You'll see your full product catalog.

Step 2 — Filter to the products you want

Use the filter bar at the top to narrow down the products:

• Collection: select the collection you want to edit
• Product type: filter by type
• Vendor: filter by vendor
• Tag: filter by tag
• Price range: filter by current price

For this example, select your target collection. The product count in the header updates in real time.

Step 3 — Configure the edit

Click New Edit and choose Price as the field to edit.

Set the operation to Increase by percentage and enter 10.

Step 4 — Preview before applying

Click Preview. BulkOps shows you a table with every affected product, its current price, and the calculated new price. Scroll through and verify the results look correct.

If something looks wrong — wrong products selected, wrong calculation — click Back to adjust your filter or operation before applying.

Step 5 — Apply

Click Apply Edit. BulkOps processes the changes in the background. A progress bar shows the status. For large catalogs (thousands of products), this typically takes 1–3 minutes.

Step 6 — Verify and undo if needed

Once complete, BulkOps shows a summary of changes. You can view the before/after for any product.

If you made a mistake, click Undo on the operation in History. This reverts all changed products to their prices before the edit.

Tips for your first edit

• Always preview before applying — it's the most important step
• Start with a small filter (one collection or tag) before editing your entire catalog
• Check the History tab after editing — it's your audit trail